Roland’s MODELA PRO II
搭配 SRP Player 軟體，甚至允許初學者操作MDX-540
做專業的雕刻，每一台 MDX-540 隨機都搭配一套Roland
SRP Player軟體，此軟體是專門為MDX-540所開發的，簡單的輸入五組必要的資訊設定，
SRP Player 軟體會自動決定使用最佳的刀巨及相關參數以產生最佳化的路徑，為避免成本及時間的浪費，SRP
Player 軟體允許您每一次雕刻前先在螢幕預覽雕刻的品質，SRP
Player 軟體相容於 WindowsR
2000/XP。
原廠內建自動換刀模組，已經經過精密雕刻測試，允許您立刻操作而不需要做長度的精細調整
Model
MDX-540
MDX-540A
可雕刻材質
Plastic,
resin and light metal
XYZ-axis
行程
500mm
(X) x 400mm (Y) x 155mm (Z) (19.6(X)
x 15.7(Y) x 6.1(Z)in.)
400mm
(X) x 400mm (Y) x 155mm (Z) (15.7(X)
x 15.7(Y) x 6.1(Z)in.)
從主軸到工作檯面的距離
Maximum
254 mm (10in.)
工作檯面範圍尺寸
550mm
(W) x 420mm (D) (21.7(W) x 16.5(D)in.)
可裝載的材質重量
At
acceleration of 0.2G: maximum 12kg
(26lb.), 0.1G: 20kg (44lb.), 0.05G:
20kg (44lb.)
400 to 12,000 rpm; 400
to 3,000 rpm for positioning and centering
重量
6.8 kg (15 lb.) (total
weight including spindle, magazine,
control box, etc.)
配件
Control box, magazine
unit, ATC spindle, air cylinder, base
plate, Z-origin sensor, spacer, cap
screws, hexagonal wrenches, retaining
bands, cable retainers, and user's
manual
*當使用換刀模組， MDX-540 的 X-axis 行程如下:
- standard table, no rotary axis unit:
400 mm (15.7 in.)
- standard table, rotary axis unit present:
270 mm (10.6 in.)/325 mm (12.7 in.) (with
expanded X-axis travel)
- T-slot table, no rotary axis unit: 400
mm (15.7 in.)
- T-slot table, rotary axis unit present:
203 mm (7.9 in.)/258 mm (10.1 in.) (with
expanded X-axis travel)
旋轉軸
(ZCL-540) 詳細規格
支援的工作材質
Resin (metal
not supported)
最大的旋轉角度
±21,474,836.47 (±59,652.3
turns)
可使用的工作材質尺寸*1
Items within the range
of a 90 mm (3.5 in.) in radius from
the center of the rotary axis by 371
mm (14.6 in.) long. The actual cuttable
range is smaller than this.
可使用工作材質的厚度
15 to 100 mm (0.6 to
3.9 in.)
可使用工作材質重量
Maximum 5 kg (11 lb.),
maximum moment of inertia: 0.02 kgm2
Center drill used: Maximum 1.5 kg
(3.3 lb.)
控制方式
Simultaneous 4-axis control
進給速率
Feed rate Maximum 20
rpm
軟體解析度
RML-1 mode: 0.1, NC-code
mode: 0.01
機械解析度
0.002
固定精度
Backlash: 0.05 , Eccentricity:
0.3 mm (0.012 in.) or less
機器外觀尺寸
720 mm (W) x 100 mm (D)
x 195 mm (H) [28.3 (W) x 3.9 (D) x
7.7 (H) in.]
重量
6.5 kg (14.5 lb.) (total
weight including drive unit, tailstock,
base plates, etc.)
配件
Drive unit, tailstock,
base plates, live center, center drill,
Y-origin sensor, Z-origin sensor,
spacer, origin-detection pin, cap
screws, T-slot nuts, hexagonal wrenches,
retaining band, and user's manual
*1 When the T-slot table is installed,
the length is 297 mm (11.7 in.).
* When this unit is installed, the X-axis
travels of the MDX-540 are as follows:
- standard table, no ATC unit: 285 mm (11.2
in.)/325 mm (12.7 in.) (with expanded X-axis
travel)
- standard table, ATC unit present: 270
mm (10.6 in.)/325 mm (12.7 in.) (with expanded
X-axis travel)
- T-slot table, no ATC unit: 218 mm (8.5
in.)/258 mm (10.1 in.) (with expanded X-axis
travel)
- T-slot table, ATC unit present: 203 mm
(7.9 in.)/258 mm (10.1 in.) (with expanded
X-axis travel)
Roland
SRP Player軟體需求規格
作業系統
Windows®
2000/XP and Internet Explorer 6.0
or later
